Owner: not known
Little has been uncovered about this pit, located to the south of
Balmain Mill. The opening date is not known but it is reported to have
been in operation in 1859. The pit is thought to have closed in early 1867.
Click on Map to Zoom In
------------------------------------------------------
Extract: Statistical Account
of Fife Parish of Largo - 1791
" ... coal may be wrought to advantage. On
the estate of Lundin, the coal has been cropped; but by erecting an
engine near the sea, a deep seam, which stretches over upon the
estate of Largo, would be opened. This would amply supply the
neighbourhood, and afford besides a considerable exportation.
..."
------------------------------------------------------
Extract: Statistical Account
of Fife Parish of Largo - 1845
" ... Many years ago, coal was wrought in
large quantities, especially near the coast. At present, there are
three seams wrought, but none of them are of the first quality. To
the north of New Gilston a singular mass of rum coal is found,
under the mass of overlying trap on the south. It is an inflammable
bituminous shale, and is extensively used for lime-burning. It is
known to be 80 feet thick, and is wrought in an open quarry.
..."
------------------------------------------------------
Information on coals worked at, or near,
Balmain Pit
(Based on a report from 1900)
A four feet thick coal seam cropped out on the Keil Burn
just 135 yds. south from Balmain Mill, where it was thrown by
a 15 fathom fault.
It is possible that this was the same seam of Splint and
Cherry Coals which cropped out with an easterly dip on the
west side of the Largo road near Brankston farm just over
½ mile to the north-west of Balmain Mill.
------------------------------------------------------
"The Scotsman"
22 April, 1867
ROUP OF MACHINERY AND COLLIERY
FITTINGS, DISUSED, AT BALMAIN COLLIERY,
NEAR LARGO.
THERE WILL BE SOLD BY PUBLIC ROUP,
On FRIDAY the 26th day of April current,
A VARIETY of MACHINERY and UTENSILS connected with Colliery
operations; among which are a Pumping and Winding Side Lever Engine,
about 14" Cylinder and ?ft. stroke, with Boiler; Pit-Head Framing and Gear;
12 and 9 inch Pumps; Rails; Blocks, and Tackle; Cart, steelyard, and ? ? ?
Articles.
Roup to Commence at One o'clock.
Also, to be Sold, unless previously disposed, and by Private Bargain, a
Second-Hand Pumping and Winding BEAM ENGINE, about 14" Cylinder
and 3 ft. stroke, with Pit Frame and Gear, as now lying at Dunnikier Foundry,
Kirkcaldy, where it may be inspected.
April 4, 1867.
------------------------------------------------------
|